1-Port PoE Injector/ Switch 10/100/1000Mbps 30W for IP Camera Networking
Features
- 1 Port at 10/100/1000 Mbps
- 30W Max Power
- Compatible with IEEE 802.3at/ PoE +
- Easy Installation - Parallel Slide-in Design
- Partial Discharge Detection
- Supports Base-T Lan Environment
- Safety Protection on Low Power Devices
This a 1000Mbps Ethernet injector with a single PoE port. At 30W of power,
it's supplies data and Power over Ethernet (PoE) using a single Cat-5 cable
(sold separately). also suitable for wireless access points, IP-based
surveillance cameras, VoIP phones, and other similar devices. All ports
automatically detect devices, speed, and cable type, making setup quick and
easy!
Specifications
| PoE Ports |
1 |
| Pass Through Data Rates |
10/100/1000 Mbps |
| Pin Assignment and Polarity |
Mode B: 4/5 (+ ), 7/8 (–), Data:1,2,3,6 |
| Output Power Voltage |
48-56VDC |
| User Port Power |
30 Watts Maximum |
| Input Power AC Input Voltage |
100 ~ 240 VAC |
| Requirements AC Input Current |
0.8A @ 100-240 Vac |
| Power Supply |
Internal |
| AC Frequency |
50~60 Hz |
| Dimensions |
145.7 mm x 64.39 mm x 43.4mm (LxWxH) |
| Weight |
174.5g |
| Indicators |
System Indicator: AC Power (Green) |
| Connectors |
RJ-45 |
| Operating Temperature |
14º to 113º F |
| Humidity |
10 to 90% maximum relative humidity,
non-condensing |
| Regulatory |
IEEE 802.3at/af, RoHS Compliant, CE/FCC |
Note : No retail package to save the cost and protect environment.
